Precision optical instruments made one at a time by fanatical craftsman
with over 30 years experience. Each component is hand mated together
Tactical turrets have larger knobs and a visually different elevation height display with bands of yellow and silver.
Tactical scopes also have a 'zero stop' facility which allow you to set the lowest elevation setting that you wish. In practice the zero stop is a left hand thread that wind up to contact the turret cap after you have set your desired lowest setting. Nip up the lock screws on the zero stop. This can be a starting point for calibration and you can return to this 'zero set' position even by feel.
Illuminated reticle feature allows for 4 levels of brightness control. Just tap the button to turn on and tap again to increase. If you forget to turn off the illumination will automatically shut off after 1 hour to conserve battery life. Illuminated reticles only available on the Tactical models.
Battery is stored behind the focus/parallax adjustment dial for illuminated versions (Tactical).
Knobs are easily removed on Tactical and Benchrest models to set the zero dial position. Hunting models 'zero set' by allowing the dial to spin free.
Scope rings available for 30mm and 34mm. Ken Farrell, Badger Ordinance and Kelbly/Stolle style
BRT Scope ring alignment and lapping kit is available in three sizes. 30mm, 1" and 34mm kits.
These are essential tools to ensure that your scope rings are perfectly aligned to accept the scope.
Without checking you cannot be sure that even your quality branded rings are in alignment as there are many other issues which impact ring alignment.
Kelbly scope rings are regarded as the industry standard for Benchrest competition. They are lightweight, strong and well made. Each pair is numbered and they are designed to fit a Stolle dovetail receiver. Davidson bases with the Stolle dovetail can be installed onto most receivers.
DEON now supply leather lens covers with each March scope. These are also available separately. for 24mm, 42mm, 52mm and 56mm front lens sizes and eyepiece lens cap.
*Disclaimer: Whilst every care is taken to quote accurate prices, ultimately prices are subject to change without notice due to manufacturers changes, currency variations or errors in posting. All prices are subject to change without notice. Please check with us to confirm. E&OE
© Copyright 2017 BRT Shooters Supply | PO Box 1124, Springwood, QLD, 4127, Australia | Phone: 07-3102 1102