English
Albanian
Bulgarian
Croatian
Czech
Danish
Dutch
Esperanto
Estonian
Filipino
Finnish
French
German
Greek
Hungarian
Icelandic
Indonesian
Irish
Italian
Japanese
Latvian
Lithuanian
Luxembourgish
Macedonian
Maltese
Norwegian
Polish
Portuguese
Romanian
Slovak
Slovenian
Spanish
Swedish
Thai
Turkish
Ukrainian
UrduColumn Category
Scope height of Genesis 6-60×56 and 4-40×52 Scopes
Posted 06/09/2022
For those customers that own Genesis 6-60×56 Scopes, below is a technical diagram which shows how to determine your scope height, from the center of the scope to the surface of the rail which is approximately the same as the center of the bolt. This is for Ballistic programs and we hope this information is useful to all our Genesis Owners. The middle part 24mm is the height for a spacer. If you are using the scope with a spacer, the scope height would be 33mm+24mm+9mm=66mm. If you are not using one, the height would be 33mm+9mm=42mm for Genesis 6-60×56 Scope.
If you are using a Mini Genesis 4-40×52 Scope, the measurement will be different. 33mm would be 31mm, 24mm would be 14.5mm in 4-40×52, 9mm remains the same. Therefore the scope height with a spacer would be 31mm+ 14.5mm+9mm=54.5mm for Genesis 4-40×52 Scope. If you do not want to use the spacer, do not add 14.5mm to calculate the scope height.
This info is to allow customers to determine the sight height and explain how it is calculated, the shooter will need to add their center bore measurement to base of rail (as shown) to get exact measurement, in most cases this will be minimal and may not make a huge difference to ballistic calculations.
