D25V52TI (MOA, Tactical, Illumi)

These compact scopes are able to encompass the performance of two or three zoom scopes in one. These scopes provide the highest magnification ratio in any rifle scope.

March Compact (SFP, 30mm tube)

Tactical Model (Illuminated)

March Compact 2.5-25x52mm
10x zoom ratio scope covering extended wide range of tactical and hunting situation.

・10X Zoom in SFP, MOA
・ED Glass
・30mm diameter body
・52mm objective lens
・Side focus 10 yard - infinity
・Scope body fully machined from aluminum ingot
・All Japanese metal parts with no plastic part except for minimum essentials such as an insulator
・Argon gas filled for internal stability
・Top quality multi lens coating where the transmittance is very near 100%
・Water repellent lens coating

Dials

MOA Type 1/4MOA Adj.dials with 0-Set One turn of both adjustment dials is 25MOA and one click is 1/4MOA. Elevation axis has a total adjustment range of 120MOA. Windage axis has a total adjustment range of 60MOA. Oversized dials for elevation, windage, and side focus for easy adjustment. The elevation dial has a 0-set function.

Reticles

MTR-1

at 10x
0.08 MOA vertical and horizontal lines with hash marks placed in 4 MOA increments.
These hash marks are placed till 40 MOA at relative position (up and down, left and right).

× CLOSE
MTR-2

at 10x
0.08 MOA vertical and horizontal lines with hash marks placed in 2 MOA increments till 20MOA.
From 20 MOA to 40 MOA hash marks are placed in 10 MOA increments till 40MOA on the right side and on the left, till 20 MOA downward.
0.25MOA floating center dot.

× CLOSE
MTR-3

at 10x
0.16 MOA vertical and horizontal lines with hash marks placed in 4 MOA increments.
These hash marks are placed till 40 MOA at relative position (up and down, left and right).
From 40 MOA onwards thick 2MOA posts.

× CLOSE
MTR-4

at 10x
0.16 MOA vertical and horizontal lines with hash marks placed in 2 MOA increments till 20MOA.
From 20MOA to 40MOA hash marks are placed in 10MOA increments.
Thick 2MOA posts are placed from 40 MOA onwards on right and left sides.
Thick 2MOA posts are placed from 20 MOA downwards.
0.5 MOA floating center dot inside the 4 MOA center circle.

× CLOSE
MTR-5

at 10x
0.2 MOA vertical and horizontal lines with hash marks placed in 2 MOA increments till 20MOA.
From 20MOA to 40MOA hash marks are placed in 10MOA increments till 40MOA on the right side and on the left, till 20 MOA downward.
Red illuminated 0.5 MOA floating center dot.
(Only the dot is illuminated red and nothing else would be illuminated )

× CLOSE
FD-1

This is a daybright fiber dot reticle. Only the dot is illuminated red and nothing else would be illuminated. At 10x, thickness of the thin cross lines is 0.34MOA and the dot size is the same. Width of the thin line is 13.75MOA. Thickness of the thick cross lines is 1.02MOA.

× CLOSE

Technical Data

		Low	High
Magnification		2.5x	25x
Effective Lens Diameter		52mm
Body Tube Diameter		30mm
Exit Pupil		--	2.08mm (0.08inch)
Field of View (real)	degree	8.0°	0.8°
	ft/100yd	42.0ft	4.2ft
	m/100m	13.99m	1.40m
Eye Relief		85-100mm (3.35-3.94inch)	89-96mm (3.5-3.78inch)
1 Click Adjustment		1/4MOA
Elevation Travel		120MOA
Windage Travel		60MOA
Focus Distance		10yd - infinity
Reticle		MTR-1 MTR-2 MTR-3 MTR-4 MTR-5 MTR-FT MTR-RTM FD-1
In the box		Flip Caps (Objective and Eyepiece) Sunshade Lens Cloth Fast Lever Hex wrench MD disk
Scope Size	A	338mm (13.31inch)
	B	139mm (5.47inch)
	C	60mm (2.36inch)
	D	41mm (1.61inch)
	E	105mm (4.13inch)
	F	94mm (3.7inch)
	G	53mm (2.09inch)
	H	48mm (1.89inch)
Weight		685g (24.16oz)

Scopes