Clarity of mind comes with clarity of vision.
With March tactical scopes you are the predator...
|Effective Lens Diameter||56mm|
|Body Tube Diameter||34mm|
|Field of View, real||4.0° or 7m @ 100m||0.5° or .9m @ 100m|
|1 Click Adjustment||0.05MIL click version or 0.1MIL click version. 1/4 MOA click version or 1/8 MOA click version|
|Elevation Travel||24MIL or 66 MOA|
|Windage Travel||12MIL or 38 MOA|
|Reticle (FFP)||Illuminated FML-1 or FMA-1|
Non-illuminated FML-1 or FMA-1 or FMA-2
|Total Length (A)||387mm (15.2inch)|
This zoom scope has an 8x magnification ratio. Available in six (6) versions. Two Mil Radian and four Minute of Angle (MOA) versions.
The m-rad version with FML-1 reticle remains constant across the entire zoom range. Target ranging is accurate at any power. You can choose from two models. One version has one turn of adjustment dial of 5 mrad, and one click value is .05 mrad (1/20th). The other version has 10 mrad per one turn and 0.1 mrad (1/10th) clicks
The MOA version with the FMA-1 or FMA-2 reticle scale value also remains constant across the entire zoom range. Target ranging is accurate at any power. Can choose from two versions in each reticle model.One version has 25 MOA per turn of the dials and has 1/4 moa clicks. The other version has 10 MOA per turn of the dials and 1/8 moa clicks which is usually more useful for target shooting. All these scopes are in illuminated version or non-illuminated version.
Additionally, with the capability to set any position as the zero point in elevation with the 0-set function, the shooter will never lose their starting calibration. As with all March scopes, high end extra-low dispersion (ED) lenses are used and the 56mm front lens delivers superb optics. For illumination models each level of reticle intensity (red) and
can be operated by simply pressing the pressure switch within the
focus dial knob. The new illumination switch has 6 levels and each level can be set or locked . One push of the pressure pad turns on and another push turns off. Auto turn off after one hour of inactivity. A STD illumination model switch is still available with 4 levels of illumination.
For Mil-rad version the reticle centre "floating"dot size is .05 mrad. For MOA the FMA-1 illuminated reticle has the centre "floating" dot of 1/4. The FMA-2 reticle is only available for non illuminated MOA versions. The centre "floating" dot is 1/8 at all magnifications. The line thickness of the reticle grid section is half that of the FMA-1. Therefore it is not a "thick" reticle as is often associated with FFP and is similar to the thickness of reticles in SFP target scopes. This reticle is specifically design for Target Shooting by Stuart Elliott and Gary Costello. The 1 moa line spacing (graduations) remain constant over the entire zoom range so a target shooter can confidently use these graduations for calculated hold offs at any and all zoom (magnification) points. Also with FFP scope design the point of aim does NOT shift throughout the entire zoom range. So a shooter can confidently zoom up or down in the process of shooting one target session. No point of aim shift. The hold off points of the graduated reticle remain constant with 1 moa spacings, relative to the target at any distance, on any zoom level. A simple, 100% accurate, precise aiming platform.
*Disclaimer: Whilst every care is taken to quote accurate prices, ultimately prices are subject to change without notice due to manufacturers changes, currency variations or errors in posting. All prices are subject to change without notice. Please check with us to confirm. E&OE
© Copyright 2017 BRT Shooters Supply | PO Box 1124, Springwood, QLD, 4127, Australia | Phone: 07-3102 1102